Pi-Star Digital Voice Dashboard Pi-Star_DV_Dash 是 pi-star 的 Dashboard,就是我们通过IP地址进入的界面。 项目地址是:https://github.com/AndyTaylorTweet/Pi-Star_DV_Dash git clone https://github.com/AndyTaylorTweet/Pi-Star_DV_Dash.git MMDVM firmware sudo apt install -y gcc-arm-none-eabi ...
Not DMR activation ("repeater fail" error) with MD380, Ailunce HD1 or some other radios: increase DMR deviation to 55 % or 60 %. RX timeout: this is due to TX and RX clock differences, which does not have easy solution. Be sure your firmware version is >= 1.4.7, which minimizes...
Set the same Frequency, Callsign, DMR ID, Color code, Repeater Slot(Time Slot Defaults 2) as Radio Mobile and WiFi Details Software:Pi-Star Note: All designs will be contributed on MMDVM open source project. IMPORTANT NOTE: When you first time set up, MMDVM hotspot will generete pi-star...
Build and Flash MMDVM_HS Firmware First, I recommend building a new MMDVM_HS firmware and flashing it to the ZUMspot board so you can take advantage of the fix injuribeparada/MMDVM_HS#135. Without this change, there are some data patterns that the MMDVM firware will interpret as an End...
If the hardware in use has a RX potentiometer, set it to the to minimum level. (If using something like the RepeaterBuilder STM32 board, decrease both the coarse and fine potentiometers to minimum level.) While observing the BER via the setup TUI (Receive BER shows a large window in the...
Not DMR activation ("repeater fail" error) with MD380, Ailunce HD1 or some other radios: increase DMR deviation to 55 % or 60 %. RX timeout: this is due to TX and RX clock differences, which does not have easy solution. Be sure your firmware version is >= 1.4.7, which minimizes...