sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi sc.exe config mrxsmb20 start= disabled Here is a link for reference: How to enable and disable SMBv1, SMBv2, and SMBv3 in Windows Vista, Windows Server 2008, Windows 7, Windows Server 2008 R2, Windows 8, and Windows Server 2...
Lanman Workstation administrative template missing LAPS - Admin account management is not enabled LAPS - GPO Removal LAPS - how to securely enable local Admin account? LAPS - revoking access of a group LAPS Admin account disabled LAPS has changed the Domain administrator password LAPS not working ...
sc.exe config lanmanworkstation depend= bowser/mrxsmb20/nsi sc.exe config mrxsmb10 start= disabled Audit SMB 1.0 Access on Windows File Servers Before disabling and completely removing the SMB 1.0 driver on the file server side, it is a good idea to make sure that there are no legacy clien...
To disable the SMBv1 client, the services registry key needs to be updated to disable the start ofMRxSMB10and then the dependency onMRxSMB10needs to be removed from the entry forLanmanWorkstationso that it can start normally without requiringMRxSMB10to first start. This will update and replace...
· To enable SMBv1 on the SMB client, run the following commands: sc.exe config lanmanworkstation depend= bowser/mrxsmb10/mrxsmb20/nsi sc.exe config mrxsmb10 start= auto · To enable SMBv2 and SMBv3 on the SMB client, run the following commands: ...
To enable or disable SMBv1 on the SMB server, configure the following registry key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters Registry entry: SMB1 REG_DWORD: 0 = Disabled REG_DWORD: 1 = Enabled Default: 1 = Enabled (No registry key is ...
To enable or disable SMBv1 on the SMB server, configure the following registry key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters Copy Registry entry: SMB1 REG_DWORD: 0 = Disabled REG_DWORD: 1 = Enabled Default: 1 = Enabled (No registry ...
Describes how to enable and disable the Server Message Block protocol (SMBv1, SMBv2, and SMBv3) in Windows client and server environments.
To enable or disable SMBv1 on the SMB server, configure the following registry key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters Registry entry: SMB1 REG_DWORD: 0 = Disabled REG_DWORD: 1 = Enabled Default: 1 = Enabled (No registry key is ...
Enable SMBv1 client: sc.exe config lanmanworkstation depend= bowser/mrxsmb10/mrxsmb20/nsi sc.exe config mrxsmb10 start= auto Disable SMBv2 server: Set-ItemProperty -Path "HKLM:\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters" SMB2 -Type DWORD -Value 0 -Force ...